Join Us!

Spaces are allowed; punctuation is not allowed except for periods, hyphens, and underscores.
A valid e-mail address. All e-mails from the system will be sent to this address. The e-mail address is not made public and will only be used if you wish to receive a new password or wish to receive certain news or notifications by e-mail.
CAPTCHA
This question is for testing whether you are a human visitor and to prevent automated spam submissions.
Image CAPTCHA
Enter the characters shown in the image.

Login

Enter your Project Envision username.
Enter the password that accompanies your username.
Request new password

Cisco Disable Login Banner

When you connect to Cisco device using telnet or ssh, you often see information message, which is called login banner. You can use login banner to  display the information message that access is allowed only for authorized personnel. However banner login can used by malicious users to easier identify your device, so I will show you how to disable it. Just bare in mind that configuration of login banner should be done according to your company’s security  policy, some companies may required predefined message to be displayed.

login as: myusername 
Authorized access only!
Disconnect IMMEDIATELY if you are not an authorized user!Using keyboard-interactive authentication.
Password:

To verify setting of login banner we can use following command

r1#sh run | inc banner 
banner login ^CAuthorized access only!

To disable login banner we have to go to configuration mode and issue no banner login command

r1#conf t 
r1(config)#no banner login
r1#wr mem
Building configuration...
[OK]

To test we connect again, this time no information message is displayed after we provided our username

login as: myusername 
Using keyboard-interactive authentication.
Password: